Using this handy tool, you can upgrade the functionality of Cura. There are options to set the location of the seam, fine tune retraction settings, and more.
CreawsomeMod is a Windows program which serves as a modification for Cura, a 3D slicing software. It aims to elevate the printing experience by refining settings, including line width, to achieve improved output quality and streamline calculation processes.
The installation procedure is straightforward as the mod seamlessly integrates with the base application. Compatibility with various 3D printers enhances its appeal, making it accessible to a large number of users. Nevertheless, it is recommended to check out the list of supported device models.
One of the standout features of this utility is its ability to improve the quality of prints. It optimizes parameters like line width, resulting in finer details and precise reproduction of parts. You can expect a noticeable upgrade in the visual and structural aspects of your 3D prints.
For the majority of Creality printers, the extruder feed rate is capped at 25 mm/s. This modification addresses this limitation by incorporating a start G code that adjusts it to 50 mm/s using an M203 command. There is an automatic warning for when the retraction is set above that value.
By default, the tool establishes the line width at 125 percent for calculation convenience and an overall enhancement of the visual appearance. While this setting generally proves beneficial, certain models may not be compatible.
- free to download and use;
- compatible with modern Windows versions;
- allows you to improve the functionality of Cura;
- you can change the settings for print profiles;
- it is possible to select the location of the seam.